Publications

Selected Articles&Proceedings

  • “Tailoring the Materials Properties with a Holistic Approach from Casting to Back Annealing”, TMS 147th Annual Meeting and Exhibition, Light Metals 2018, p. 971-975, March 2018, Phoenix, Arizona, USA.
  • “Controlling the Microstructural Evolution During Soft Annealing of Cold Rolled Twin-Roll Cast AlMnMg Alloys by Homogenization Heat Treatment”, TMS 147th Annual Meeting and Exhibition, Light Metals 2018, p. 953-958, March 2018, Phoenix, Arizona, USA.
  • “Grain Refiner Sedimentation in the Launder System of Twin Roll Casting and Application of Electromagnetic Stirring”, TMS 147th Annual Meeting and Exhibition, Light Metals 2018, p. 1021-1025, March 2018, Phoenix, Arizona, USA.
  • “Determination of Aluminum Oxide Thickness on the Annealed Surface of 8000 Series Aluminum Foil by Fourier Transform Infrared Spectroscopy” TMS 146th Annual Meeting and Exhibition, Light Metals 2017, p. 273-278, March 2017, San Diego, California, USA.
  • “Effect of As-Cast Strip Thickness and Reduction Prior to Soft Annealing on the Formability of Twin-Roll Cast 5754 Sheets” TMS 145th Annual Meeting and Exhibition, Light Metals 2016, p.1037-1041, Feb 2016, Nashville, Tennessee, USA.
  • “Crystallographic Texture Development of As-Cast 3105 Alloy Produced by St/Cu Shell Pair” TMS 145th Annual Meeting and Exhibition, Light Metals 2016, p.1025-1030, Feb 2016, Nashville, Tennessee, USA
  • “Improvement of Corrosion Resistance in Modified 3003 Aluminum Alloys Produced By Twin Roll Casting Under Different Casting Parameters” TMS 144th Annual Meeting and Exhibition, Light Metals 2015, p. 1255-1259, March 2015, Orlando, Florida, ABD.
  • “Effect of Cu Addition on the Microstructural Constituents and Mechanical Properties of Twin Roll Cast AlFeMnSi Alloys” , TMS 144th Annual Meeting and Exhibition, Light Metals 2015, p. 971-975, March 2015, Orlando, Florida, ABD.
  • “Effect of Casting Parameters on Microstructure, Recrystallization Behavior and Final Material Properties of Twin-Roll Cast 1050 Alloy” TMS 144th Annual Meeting and Exhibition, Light Metals 2015, p. 1219-1223, March2015, Orlando, Florida, ABD.
  • “Influence of Microstructural Constituents and Applied Thermomechanical Processes on Corrosion Behavior of Aluminum Alloys Produced With Twin Roll Casting (TRC) Technique” International Conference on Aluminum Alloys (ICAA), Materials ScienceForums vols. 794-796, p. 181-186, June 2014, Trondheim, Norway.
  • “Determination of Aluminum Rolling Oil and Machinery Oil Residues on Finished Aluminum Sheet and Foil Using Elemental Analysis and Fourier Transform Infrared Spectroscopy Coupled with Multivariate Calibration” TMS 143rd Annual Meeting and Exhibition, Light Metals 2014, p. 415-420, Feb. 2014, San Diego, California, USA.
  • “Effect of Process Flow on Material Properties of Modified 3003 Aluminum Alloy Developed for Brazing Applications”, 8th International Congress on Aluminum Brazing and Exhibition, p. 34-37, June 2014, Düsseldorf, Germany.
  • “Effect of Zn Content and Process Parameters on Corrosion Behavior of Twin-Roll Cast Aluminum Brazing Alloys”, TMS 142nd Annual Meeting and Exhibition, Light Metals 2013, p. 361-364, March 2013, San Antonio, Texas USA.
  • “A TEM Study of the Microstructures of 3003 and 3003-Zr Alloys Produced by Twin Roll Casting” TMS 139th Annual Meeting and Exhibition, Light Metals 2010, p. 753-758, Feb 2010, Seattle, Washington, USA.
  • “Aluminum foil: Its typical quality problems and their causes ”, Journal of Materials Processing Technology, Vol. 186, p125-137, 2007.